• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
Endless Energy

Endless Energy

  • Heating
    • HVAC Service
  • Cooling
  • Home Energy Assesments
  • Solar
    • Solar Service
  • Commercial
    • Heating & Cooling
    • Solar
  • About Us
    • Endless Energy Blog
    • Referral Program
    • Leave a Review
  • Contact Us

Solar

Net Metering: How Does it Work?

April 21, 2022 by Kai Haskins

Outlined below is everything you need to know about how net metering works, how it benefits you, and what the are in your state.

What Net Metering?

To put it simply, net metering is an agreement between the solar system owner and the power company. How does the deal work? Essentially, if your solar energy system produces more electricity than your house can use, then the excess goes into the grid and the meter runs backwards, providing you a credit. According to the Solar Energy Industries Association, only about “20 40% of a solar energy system’s output ever goes into the grid.”

There are two different types of net metering: conventional and aggregate. Quoted from the National Conference of State Legislatures, the two definitions are:

  • “Conventional net metering, sometimes referred to as individual net metering, connects a generating source to single meter, such as a house or building. The recent expansion of net metering policies allows generating sources to be connected to multiple meters or multiple properties.”
  • “Aggregate net metering and virtual or community net metering have authorized net metering for new customer types, including non-profits, multi-unit residences, multi-property owners, renters, municipalities and others who cannot install distributed generation. Under conventional net metering, these customer types could not have benefited from net metering.”

For most of our customers reading this, you fall into the category of conventional net metering because it’s for a single house. Keep reading to see how you benefit.

How Do You Benefit from Net Metering?

We previously used an example of banking to describe the benefits of net metering, which you can check out in our last blog post. Going back to that example, net metering can be compared to banking. Let’s say you make $100 in July. After paying $80 in bills, you have $20 left over, which you deposit it in the bank to save for later. If, in September, you only earn $60, you can use the $20 from your savings to pay your bills. Net metering works the same way, only instead of a bank keeping track, it’s the utility company. This system prevents you from ever wasting the energy you produce, and saves you from paying if your solar system has over produced previously but under produces in the future.

Additionally, another positive of net metering is that the excess energy is automatically deposited into the grid without you having to do anything, like direct depositing your paycheck. Before net metering, homeowners had to install expensive batteries if they wanted to save excess solar production, or just dump the excess into the grid without getting a credit, so it was just giving electrical companies energy for free with nothing in return. Nowadays, any electricity the house doesn’t use is automatically deposited into the grid via the net metering system.

Living Off-the-Grid (or Not Net-Metered)

If you decide to live off-the-grid—meaning that you’re not connected to a power company and your solar panels only send energy directly to your home—then you can’t benefit from net metering. This means you must either store your solar energy locally, as in batteries, or the excess disappears because it goes unused.

Going back to our example of banking, when you store your money in a safe under your bed, you have to remember to put your funds in there. Otherwise that money gets wasted. If your check is direct deposit, like how net metering works, then your money is safe for later. Applying this to solar-generated electricity, net metering automatically deposits energy into the grid while local storage typically isn’t automatic. If you choose to store your power locally, you have to keep the battery charged for it to work, so it’s more of a short-term solution. Having your solar power connected to the grid/power company allows you to access energy whenever you need it.

That being said, if you’re interested in getting off the grid – give us a call!  We’ve got several backup power solutions to help you get there.

Massachusetts Laws

The state of Massachusetts says that if you are a customer of a regulated electric company (listed in the table below), you’re allowed to net meter. Depending upon the electric company you contract with, there’s only a certain amount of energy that can be stored on the grid. Current laws requite the utility companies to provide net metering to all customers under 10 KWAC and commercial customers under 25 KWAC.

For a more specific breakdown of the qualifications, please refer to the Massachusetts government website: https://www.mass.gov/guides/net-metering-guide

Pennsylvania Laws

The electric distribution companies (like Penelec) nameplate capacities of 500 kW or greater. According to the website, the state system capacities are 50 kW for residential, 3 MW for non-residential, and 5 MW for micro-grid and emergency systems. But, there is no aggregate capacity, which makes it easier for you to store your excess power.

Again, for more information, please refer to the Pennsylvania government website: http://www.puc.pa.gov/consumer_info/electricity/alternative_energy.aspx

Overall, net metering is a great way to store your energy and get it back when you need it later. Luckily, if you need help figuring this out, we’re always here to lend a hand. We have official resources and our company resources below.

Resources:

http://programs.dsireusa.org/system/program/detail/65

https://www9.nationalgridus.com/masselectric/home/energyeff/4_net-mtr.asp
https://www.seia.org/initiatives/net-metering

http://www.ncsl.org/research/energy/net-metering-policy-overview-and-state-legislative-updates.aspx

Filed Under: Solar

Will my Solar Panels Still Work in the Snow?  

January 10, 2022 by Kai Haskins

A commonly asked question concerning solar energy is whether or not the panels function when there is snow on them? Particularly, a point of confusion is whether or not solar is worth the investment in locations with long winter months. As a matter of fact, too much heat can have a negative effect on solar power production, so winter months typically produce solar at a higher efficiency than warmer ones. Granted, there is less sunlight to work with – but your panels do in fact function at higher efficiency! Together we’ll break down this process step-by-step to see how residential solar production works in the winter.

Light vs. Heat

Solar panels only require light for energy output, not heat. The efficiency of solar power can be impacted in extremely warm temperatures, but the colder temperature will cause your panels to run at higher efficiency.

This is partially because in the summer months, the warm weather can cause photovoltaic units to heat up, and become slightly less efficient.  This is not an issue in winter months as the photovoltaic panels are less effected by cold temperatures than hot ones.

Sometimes, the difference between solar energy and thermal energy is confused.  Thermal energy is dependent on heat, while solar energy is only dependent on light; and while there are some technologies that rely on thermal energy, the photovoltaic panels which are more practical for residential use rely only on solar energy.  As an example, if you went skiing, your body temperature could get very cold (thermal energy) and you could still get a goggle sunburn (solar energy).

In other words, don’t worry about the temperature, just be concerned about angling your solar panels for optimal sunlight exposure.

What happens when there is snow buildup?

Luckily, standard PV solar panels are made of materials like polysilicon and monocrystalline silicon, encased in glass, which allows snow and debris to easily slide off. Also, by increasing the angle of your solar panels, snow can melt right off the side without you doing any work to clear them. Just think of how easily ice slips and slides around at the bottom of a glass. And, the steep panel angle can increase your light exposure due to the lower sun position.

Furthermore, snow buildup on the ground can lead to increased solar production because of the albedo effect. What is the albedo effect? In simple terms, sun reflects off the snow, increasing the amount of light exposure by approximately 10%. So a nice snowy day can actually be beneficial to solar energy production!

Net Metering

First, what is net metering?  Net metering is a solar incentive that’s mandated in 42 states, including Massachusetts and Pennsylvania, allowing you to store excess energy in the grid to use later.

How does this energy storage work? When you produce more solar energy than you need in sunny months, the excess goes back into the grid, allowing others to reap the benefits of clean power production.

However, if in less sunny months if need more power than you produce you, can use energy from the grid at no additional cost. Endless Energy will look at a year of electricity bills, to determine the net amount of energy you will need to produce in the summer vs. winter so that you will have no electric bill all year long.  

Think of it like a bank: if you put money into your account in the summer, then you can withdraw it later. Boiled down, net metering is a solar credit that you can draw from if you produced surplus solar energy in sunnier months so you don’t have to pay if you under-produce in the winter.

Now, because the days are shorter in winter and produce less light, does that mean your energy output could decrease? Yes. So, how does net metering benefit you in winter? If your solar production isn’t quite as high in the winter as it was in the summer, that extra production in the summer can carry over production from summer months.

Let’s take a look at an example: Germany

Germany is the second largest producer of solar energy in terms of square miles, and shares a similar climate to the Northeast United States. In the summer, Germany gets hot and humid, while winter has low temperatures, rain, and snow. We can compare the success in Germany to how successful solar panels can be in Massachusetts in the winter months as well. If Germany can be one of the largest solar producers in a similar climate, then we can see that the Northeast region of the US could produce solar on a similar scale.

All this to say, your solar panels will still work during the winter and will likely be functioning at an even higher efficiency (although the hours of sun are shorter). Thank you for your readership. If you have any further questions, please feel free to reach out; we have attached some company resources below. If you’re interested in doing more research on solar panels, below are some links to further explain the science and logistics behind solar panels’ production in the winter.

Helpful links:

http://scienceline.ucsb.edu/getkey.php?key=2668

https://www.conservationinstitute.org/facts-about-solar-energy/
Rooftop solar: Net metering is a net benefit
https://arxiv.org/pdf/1709.10026.pdf
Has the Mass. solar gamble paid off?

Filed Under: Solar

Endless Energy partners with Home City Development to install solar on 19 residences in Springfield

February 20, 2020 by Kai Haskins

February 20th 2020, Springfield, MA – Non-profit Home City Development has partnered with Endless Energy to install solar PV arrays on 19 homes in Springfield. This is part of the next phase in the ongoing rehabilitation and renovation of the E. Henry Twiggs Estates in Springfield.

The addition of solar panel arrays will not only offset 7,640,291 lbs of CO2 in the atmosphere over the next 30 years, but also eliminate or significantly reduce the electricity bills for some residents. Funded in part by the MassHousing agency, TD Bank, and Home City Development, this effort demonstrates Massachusetts’ continued commitment to helping its residents achieve top tier levels of climate resiliency and energy independence.

Many homeowners and renters cite monthly heating and electric bills as major points of anxiety. The reduction or elimination of these costs puts more money back into residents’ pockets, and therefore more money into back into local economies. In fact, few investments have as high return on investment as energy saving measures such as insulation, HVAC upgrades, and solar PV.

This new effort in Springfield comes as little surprise, considering Massachusetts has long been a leader in offering incentives and rebates for citizens wishing to improve their home’s energy efficiency. In addition to the 26% federal tax credit, Massachusetts residents can also take advantage of state tax credits, and utilize the SMART program to be paid for their solar production. The Mass Save Program offers homeowners and landlords no-cost whole-home LED lighting upgrades; no-cost targeted air sealing; 75%-off blown-in insulation; and generous rebates on heating system upgrades.

Endless Energy is a top rated Mass Save Partner, and has been helping residents in Massachusetts reduce or eliminate their electric and heating bills for over 12 years. If you would like to schedule a Mass Save Home Energy Assessment, or speak with someone about solar PV or HVAC, you can reach our office at 508-357-2354.

Filed Under: Solar

A Brief History of Solar Power

March 28, 2019 by Kai Haskins

With the increased access to solar power, more and more people are using the sun’s energy to power aspects of their everyday lives. But, how was solar power invented? It’s fascinating to learn about the origins of something considered so commonplace today, like harnessing energy from the sun. Who did this? When did they do this? In this post, we’ll take you through a brief history of solar power and how it became the powerful renewable energy source you know, today.

Early History

The beginning of solar power use is very different from what it is today. Humans first used sunlight to light fires with a magnifying glass in the 7th century B.C. The Greeks and Romans discovered documentation of this in 3rd century B.C., but the first documentation in the East was in 20 A.D. This tool became known as “burning mirrors.” Although it might not have been in your history textbooks, the story of Greek inventor Archimedes using burning mirrors to set fire to invading Roman ships in 212 B.C. is famous for its engineering marvel. Despite contention over whether this event happened on this scale, burning mirrors were regularly used by the Greeks and are still used today. In fact, the use of over 2,000 mirrors to generate electricity is currently being implemented in the Mojave Desert to make 10 megawatts of power.

Leonardo da Vinci is famously known for his paintings and sculptures during the Renaissance, but he also found interest in engineering and science. In the 15th century, da Vinci made the first known attempt to harness solar energy.

Another 300 years later in the mid-1700s, Horace de Saussur, a Swiss physicist, invented the first working solar oven, which was used on ships for long voyages.

Invention of Solar Cells

The history since the 1800s has been very divided. Some people credit the original discovery of PV potential in the early 1800s, while others only credit the PV cell invention in the mid-1900s. But, we’ll take you through that process to let you determine for yourself.

It all began in 1839, when French scientist Edmond Becquerel discovered the “photovoltaic effect.” Becquerel observed the production of electric currents when two metal electrodes were exposed to light, laying the foundation for future discoveries. The next major milestone occurred in 1873, when English electrical engineer, Willoughby Smith, discovered the photoconductivity of selenium. This led to the discovery by William Adams and Richard Day in 1876 that selenium creates electricity when exposed to sunlight.

Many people attribute the invention of solar cells to Charles Fritts, who created the first solar cells from selenium wafers in 1883. While some potential for the wafers was found in the following decades, none were fully functional. Little headway was made until Russell Shoemaker Ohl created the first silicon solar cell in 1940 at Bell Labs, which only had 1% efficiency.

However, it took another 14 years for Bell Labs engineers Daryl Chapin, Calvin Fuller, and Gerald Pearson to invent the first fully-functioning silicon, photovoltaic cell in 1954. Bell Labs announced the invention on April 25, 1954, which led the front page of the New York Times on April 26th to read: “the beginning of a new era, leading eventually to the realization of harnessing the almost limitless energy of the sun for the uses of civilization.” Just two years later, in 1956, the first solar cells were available for commercial use at a steep $300 for a 1-watt solar cell.

According to the U.S. Department of Energy, from 1956 to 1975, the cost of solar panels decreased from $300 per watt to $100 per watt. And today, a solar panel costs a fraction of the price.

The Rise of Solar Power

Between 1970 and the 1990s, there was a massive rise in the use of solar within the US. The first instance of this was when the US became the first country to use solar power in space. The Vanguard I satellite was launched into space in 1958 and the still-orbiting satellite used a one-watt panel to power its radios.

Shortly thereafter, in 1973, the first solar powered building was created on the University of Delaware campus by researchers and students. The building was named “Solar One.” Then, students across the world had the opportunity to see solar power in action when solar powered calculators were invented in 1978.

In 1979, during Jimmy Carter’s presidency, he had solar panels installed on the roof of the White House. Although removed in 1981, President Obama reinstalled the solar panels in 2010 and added a solar water heater.

Solar as We Know it Today

Since the Solar Investment Tax Credit (ITC) was passed in 2006, there has been an increase in industry stability and growth. In the last decade, the use of solar panels has increased by an average 59% annually. Now, more than 250,000 Americans work in the solar industry—an increase of 123% since 2010—with more than 10,000 companies providing solar services nationwide. And, in 2018, the cost to install solar fell by more than 70% since 2010. According to SEIA, “In 2018, a new solar project has been installed in the U.S. every 100 seconds… [and] there are now more than 1.9 million solar installations in the U.S.” Now is the best time to make the switch to renewable energy.

If you would like to join the nearly 400,000 homeowners in Massachusetts who use solar power for their homes, take a look at our website.

Check out how you can have your own solar panels installed. Get a quote from us today.

Filed Under: Solar

Primary Sidebar

Recent Posts

  • Homeowners Rejoice: The Mass Save Heat Loan has Been Increased to $50,000!
  • The Pros and Cons of Oil Heat vs Heat Pump Systems
  • Electric Resistance Heat vs. Mini-Split Heat Pump Systems
  • What is an Electric Heat Pump, and How Do They Work?
  • Newton Residents Can Save Big, and Cut Energy Costs

Recent Comments

No comments to show.

Archives

  • January 2023
  • October 2022
  • September 2022
  • August 2022
  • April 2022
  • January 2022
  • October 2021
  • February 2020
  • January 2020
  • March 2019

Categories

  • Energy Efficiency
  • Heating & Cooling
  • Insulation
  • Solar
  • Uncategorized
Endless Energy

Footer Row 1 Col 1

Endless Energy

Footer Row 1 Col 2

Endless Energy is a local privately owned full-service energy solutions company. We are committed to innovation, sustainability, and growth for our clients. By using our website you agree to our Privacy Policy, available here.

Footer Row 1 Col 3

MAIN OFFICE:

184 Cedar Hill Street, Marlborough, MA 01752

508.357.2354

Monday - Friday: 8:00 Am - 5:00 Pm

info@GoEndlessEnergy.com

©2023 ENDLESS ENERGY. ALL RIGHTS RESERVED

Footer Row 2 Col 3

  • Facebook
  • LinkedIn
  • Twitter